Semco Infratech Private Limited

Product Details:

Equipment features:

• Feeding method: manually load batteries to the feeding hopper
• Receiving method: manual collection
• Sticker station: stick 4 batteries at a time 
• Sticker method: the cylinder drives the knife to paste the barley paper
• Control system: Panasonic PLC+7-inch MCGS touch screen

Product Details:

Model No:-Semco SI PI 18650=This machine adapts whole box feeding cell, which is an automatic equipment for the cylindrical cell pasting paper. This equipment stepping motor and cylinder were controlled by PLC, completing the function of the cell insulation paper pasting. The mechanical structure design is simple and generous, and the system performance is stable. It is one of the most cost-effective cylindrical cell papers pasting machine in the market. 

Product Details:

·        Applicable battery specifications: 18650/21650 /21700 cylindrical cell

·        Sticker efficiency: ≥60PPM

·        Qualified rate: ≥99%

·        Grain movement rate: ≥99%

·        Working air source: 0.5-0.8mpa

·        7-inch touch screen human-computer interaction interface

Product Details:

Semco SI 05C SM 18650 Five Channels Automatic Sorting Machine - HK 3561=Automatic Battery Cell Sorting Machine

Product Details:

Automatic Sticker Machine for 33140/32142

Equipment features:

·        Feeding method: Manually install the battery into the hopper

·        Receiving method: Manual receiving

·        Sticker station: Stick 4 batteries at a time

·        Sticking method: The cylinder drives the punching knife to paste the barley paper

·        Control system: Panasonic PLC+7-inch MCGS touch screen

Product Details:

SEMCO SI-DSWM-6X-5000A Double Side Automatic Spot Transistor Welding Machine – Pneumatic=The function of welding process is as follows:

1.3.1 Manually push in the battery pack fixture Automatic operation function when in place.

 

Automatic Operation Function of Battery Packaging Tool after Manual Pushing in Position

 

1.3.2 Electric positioning and pressing/compression function Features.

 

1.3.3 Double-sided simultaneous automatic spot-welding function

 

1.3.4 Manual 90-degree change of welding head Features (to be customized).

 

1.3.5 Laser positioning and alignment Features.

 

1.3.6 Optional front and back discharge functions. Optional pre-discharge and post-discharge functions

 

1.3.7 Wired remote control function of movable man-machine.

 

1.3.8 Automatic poor welding current alarm and repair welding function. (This function is available

 

when supporting high frequency inverter and transistor welding power supply)

Product Details:

 

Model No:-SEMCO SI 05C SM 32700 Five Channels Automatic Sorting Machine - Hioki 3561

 

Product Details:

Model No:-SI SSWM 3X 8000A-Pnuematic=Automatic spot welding machine is a multi-axis motion controller developed by modern automation expert technology, with precision transmission and motor control mechanism, automatic walking mechanism, precision welding power supply, and effective real-time control processing automatic production equipment. Combined with the company's many years of experience in spot welding in the lithium battery industry, we develop and design for the application scenarios in the automatic welding production of lithium battery packs. The welding efficiency is high, the welding quality is good, the positioning is accurate, it is suitable for many products, the performance is stable, and the maintenance is simple and convenient. It is the first choice for automatic welding production such as lithium battery PACK welding. 

Product Details:

Semco SI DSWM 8X 8000A Double Side Automatic Spot Welding Machine - Fully Electric=

Product Details:

Model No:- Semco SI 11C MFSM Multi-Function Cell Sorting Machine 18/21/26/32 With HK 3561=Machine is an automatic equipment suitable for testing the voltage and internal resistance of cylindrical batteries of various specifications. 10 good products, 1 bad product.

Product Details:

•  
  Model No:-Semco SI-DSWM-8X-8000A Double Side Automatic Spot Welding Machine - Pnuematic=
  Welding machine features: Maximum welding of 594 cells, constant current and voltage switching, real-time monitoring of abnormal alarms.
  Rotary welding head welding characteristics: it can weld heterogeneous battery packs, the machine head can rotate up to 180° left and right, and it has the function of anti-sticking needle.
  Working conditions: 220V±10% 50Hz;
  Welding characteristics: 2000 18650 batteries/hour,
  Welding thickness: 0.03-0.2MM welding time and power adjustable
  Hardware configuration: automatic high-precision machining two-axis pressurizing follower mechanism, Japan imported Mitsubishi or Panasonic servo motor, imported alumina brazing needle,Weiluntouch screen,Forced water circulation cooling system,High-precision 6-axis controller; Electric clamping, positioning and alignment of modular workpiecesFunction, Automatic alarm for poor welding current;
  Dimensions: 1000MM*800MM*1620MM (L*W*H)
  Wiring specifications: ≥4 square millimeters
  SI-DSWM-8X-5000A Double Side Automatic Spot Welding Machine - Fully Electric
  Features of the welding machine: Maximum welding of 419 batteries,Constant current and constant voltage switching, real-time monitoring of abnormal alarm; pure electric operation, no air source; with rotating welding head, anti-sticking needle function.
  Welding head features: The welding head can rotate at 135???, and it can rotate while not rotating; the welding head can move up and down, and the fixture does not move. It is suitable for welding non-standard nickel sheets and heterogeneous nickel sheets. Removable operation display screen.
  Working stroke: 530*350, can go forward and go out, go forward and go out.
  Working conditions: 220V±10% 50Hz
  Welding characteristics: 3000-3200 18650 cells/hour,
  Welding thickness: 0.03-0.3MM (more than 0.2, slotting is required) adjustable power, adjustable power
  Hardware configuration: automatic high-precision machining two-axis press follower, Structure, Panasonic servo motor imported from Japan, imported alumina brazing needle, MCGS touch screen, Taiwan silver guide rail, module workpiece; forced water circulation cooling system;Positioning and alignment function, automatic welding current bad alarm and repair welding function. Door opening alarm system.
  Dimensions: 1450MM*1030MM*1770MM (L*W*H)
  Wiring specifications: ≥4 square millimeters.

Product Details:

Semco SI 10C SM 32700 Ten Channels= The automatic battery cell sorting machine is professional designed for the sorting test of 18650 cylindrical lithium battery cells which have completed the capacity sorting before out of factory. With the modular design (electric control), servo motor control (actuator) and standard control components (electric circuit), the sorting machine can execute the sorting test based on the voltage and internal resistance tests before assembly.

The battery sorter machine has 8 channels for OK battery cells and 1 for NG battery cells, which greatly promote the sorting efficiency and ensure the normalization of cells sorting. While operating, the cells will be loaded and stored away by hands, which realizes the sorting automation. Furthermore, with optional barcode scanning system and sophisticated functions of test data record, query and uploading, this machine ensures the traceability and control of cells sorting.

Product Details:

Model No:- Semco SI BB 24S 10A=24-way full automatic lithium equalizer, support the charge and discharge current, the charge and discharge port supports 20A+ 50A, display function and touch handling, Displays all individual battery voltages and can touch the, handling functions Support for multi-machine series use, Pressure balancing function Support the maximum pressure differential accuracy of0.000 control for fixed pressure balance function.

Product Details:

Model Number:- Semco SI 10C SMBR 32700 Ten Channel Automatic Sorting with Bar Code Scanner – HK=Description

1. The cells sorting machine adopts new hopper type automatic feeding structure, feeding high speed and stable, no impact and scratch on the cells, direct manual feeding of the whole box, and can realize uninterrupted production.

2.18650 cells sorting detection is a part of the high accuracy and high stability of internal resistance detector, feeding part of the high speed and high stability feeding mechanism.

3. The material box of the sorting machine adopts multi-file structure, with full alarm function, and the end of the material box opens the door for quick and convenient feeding.

 

4. Internal resistance and voltage detection results are analysed by the computer to generate classified data for different bins. The detection system has the database function, which can query and export the historical detection data.

Product Details:

Model No:-Semco SI 8S Balance Module=Improve Battery Safety QNBBM Balancer equalize voltage for every series of batteries. Prevent all cell overcharge or over discharge. Maximum Battery performance and extend Battery life.

Product Details:

Semco SI HWM 801B=battery spot welder is equipped with two super capacitorsfor energy storage and a stable power source for pulse spot welding. Compared to the traditional ACspot welder, it has no interference to the electric circuit and no more tripping problems. The maxpulse welding power can be up to 12 kW, ensuring you a reliable welding effect.

ApplicationWelding of lithium iron phosphate battery without nickel conversion carried out with nickelaluminium composite sheet. Welding lithium iron phosphate with pure nickel sheet. Used inbatteries, metal hardware, electronic components spot welding work

Product Details:

Semco SI 10C MFSM Multi-function Cell sorting machine 18/21/26/32 with original HIOKI 3561=The equipment is controlled by PLC and PC. The PLC is responsible for cell feeding, cell handling and cell sorting of IR Value. The PC is responsible for cell testing and data collection, voltage internal resistance rating, high work efficiency, good product performance. The device is equipped with universal movable casters, the device can easily move when it is displaced.

Description of Parts:

 

1. The separator adopts new hopper type automatic feeding structure, feeding high speed and stable, no impact and scratch on the cell direct manual feeding of the whole box, can realize uninterrupted production.
2. Cell separator detection part of the high accuracy and high stability of internal resistance detector, feeding part of the high speed and high stability feeding mechanism. 3. Multifunction automatic sorting machine feeding manipulator adopts servo manipulator multi numbers feeding structure. Make each cell feeding time less than 1 second.
4. The material box of the sorting machine adopts multi-file structure, with full alarm function, and the end of the material box opens the door for quick and convenient feeding.
5. Cell separator internal resistance and voltage detection results are analysed by the computer to generate classified data and generate graphs and bar graphs at the same time, convenient for intuitive statistics and display of mass production quality. The detection system has the database function, which can query and export the historical detection data.

Product Details:

 

Model No:- Semco SI BCDS 60V 40A 4CH=Battery Charge & Discharge Cabinet Tester=Energy feedback energy-saving type. Constant current to constant voltage charging safely and smoothly. High precision Calibration method. Excellent heat dissipation performance. The channel is detachable. The built-in temperature of the device. Single box power supply. Power independent. The clamp is flexible and adjustable.

 

Product Details:

 

Model No.-Semco Automatic Max Fibre Laser Welding-2000W=High precision lithium battery module laser welding machine has the gantry structure which can be welded in large format, and multiple sets of fixtures can be installed at the same time to weld various specifications and models of lithium battery modules. Laser welding spot is fine, high penetration, small taper, high precision; welding surface effect is smooth and no bubbles. The laser welding process is pollution-free, the heat affected zone is small, and the deformation is small. The water-cooling system is adopted to ensure the life of the laser device. High-definition CCD monitoring screen and red-light positioning indicator make the software editing process easy and convenient. Stable performance of industrial PC, welding system software operation is simple and easy to learn.

 

Product Details:

SEMCO SI 10C SM 18650 Ten Channels Automatic Sorting Machine - HK 3561=

Product Details:

Model No:- Semco SINC 200TD - Fully Automatic 200TD Electronic Eye Cutting Machine=Strip Automatic Lithium Battery Metal Strip Nickel Plates Cutting Machine Copper Foil Electrode Tube Pipe Cloth Plate Cutter. The cutting machine is suitable for cutting tube, ribbon/webbing/belt, cable/wire, sheet, film etc. Tube: PVC tube, heat shrink tube, PVC heat shrinking tube, fiberglass tube, corrugated tube, etc. Cable: Flat cable, copper wire, etc Tape: nickel strap, hook and loop, cotton tape, elastic band, plastic tape, zipper, conductive tape, foam, etc Sheet: battery separator, Nickel sheet, diffuser sheet, plastic/rubber sheet, pvc sheet, etc Film: plastic film, reflecting film, double-sided tape, Malar film, insulation paper, PE, Copper/Aluminium foil, release paper, etc.

Product Details:

Semco SI-SSWM-3X- 5000A Single Side Automatic Spot-Welding Machine - Fully Electric-Automatic spot-welding machine is a multi-axis motion controller developed by modern automation expert technology, with precision transmission and motor control mechanism, automatic walking mechanism, precision welding power supply, and effective real-time control processing automatic production equipment. Combined with the company's many years of experience in spot welding in the lithium battery industry, we develop and design for the application scenarios in the automatic welding production of lithium battery packs. The welding efficiency is high, the welding quality is good, the positioning is accurate, it is suitable for many products, the performance is stable, and the maintenance is simple and convenient. It is the first choice for automatic welding production such as lithium battery PACK welding. 

Product Details:

Semco SI-SSWM-3X- 5000A Single Side Automatic Spot-Welding Machine - Pneumatic=This machine is used for cylinder battery pack automatic spot welding.

Product Details:

SEMCO SI-DSWM-6X-5000A Double Side Automatic Spot Transistor Welding Machine -Fully Electric-Combined automatic welding of cylindrical batteries.

 

Welding machine features: Maximum welding of 594 cells, constant current and voltage switching, real-time monitoring of abnormal alarms.

Product Details:

Model No:- Semco SI HWM 737DH=Intelligent Time-Delay Battery Spot Welder Features

Automatic spot welding: provides intelligent auto-triggering spot welding, pulse current precise adjusting, time delay spot welding, actual welding current value display.

Built-in LED Light: These features help you to spot weld the LED light fixtures. It can enhance the spot-welding vision at night or in low brightness environment. Precise spot welding.

Two welding mode: AT mode is provided automatic welding mode and MT mode is provided Manual spot-welding mode with foot pedal switch.

Pulse welding power adjusting: Machine’s pulse spot welding power can adjust, twist clockwise to turn down and twist anti-clockwise to turn up. These parts work together with737 DH machine’s pulse current & pulse number adjusting functions, enabling the machine to provide excellent and reliable welding effect on 0.5-0.35mm nickel strips.

Product Details:

Semco SI DSWM 8X 5000A - Double Side Automatic Spot Welding Machine - Fully Electric-Applicable product areas: energy storage power stations/electric bicycles/electric motorcycles/electric vehicles/electric tools/aircraft model aircraft/plant protection agricultural machinery/disaster response/ health equipment/medical appliances/wild operations/water sports/underwater submarine/artificial intelligence/security Technology/unmanned factories and other production and life applications of modularized lithium battery packs for spot welding, and other lithium battery pack production line equipment to form the entire production line.

Product Details:

Model Numbers=Semco SI CCD Tester-

 

For Lithium Ion Battery-CCD solder joint detector is an automatic equipment for lithium battery processing, which has the functions of automatic positive and negative pole detection, positive and negative solder joint detection, solder joint defect differentiation, automatic discharge, etc.
Features1. Through the CCD computer system, set the measurement mode, accuracy parameter range, adjust each parameter, and the equipment starts to monitor and enter the working state.2. Action process: manual loading of the whole box of batteries-start CCD detection button-CCD system analysis-CCD system discrimination (OK/NG)- receiving personnel. 3. The equipment is required with a sound and light alarm, fault alarm, etc. The operating parameters can be freely set according to the actual requirements of customers.4. Clean, no strong electromagnetic interference.5. Adapt to battery specifications: Many kinds of finished product Batteries Polarity detection

Product Details:

Semco SI MWN 8000A Gantry, Unipolar Transistor - Pnuematic=

Product Details:

Model No:-Semco SI MWN 6000A Gantry, Unipolar Transistor – Pnuematic=

Product Details:

Equipment operating environment requirements.2. Operating temperature range: -10°C~40°C.3. Humidity: ≤85%.4. Site: no pollution and strong electromagnetic interference.5. The maximum size of the equipment Length: 1450mm; Width: 750mm; Height: 1500mm.6. Total weight: 180kg.7. Equipment electrical: AC220V±10% 50Hz; power consumption≤800W.8. Compressed air: the pressure is 0.5 ~ 0.7Mpa.

Product Details:

Semco SI 10C SM 32700 Ten Channels Automatic Sorting Machine - HK 3561

Product Details:

Model No:-Semco SI MWN 5000A Gantry, Unipolar Transistor - Fully Electric=

Product Details:

Model No:- Semco SI HWM 788S PRO =

 

High-power spot welding + charging integrated spot-welding machine 3.8KW- -pro spot welder has been designed to weld up to 4 rows of 18650 batteries quickly and efficiently. It is supplied with a welding pen and foot pedal. This multifunction battery welding machine is a key piece of portable equipment to use for welding batteries. This battery welding machine features an intelligent chip which automatically stops the spot welder if it over heats during use. This intelligent chip is a fantastic safety feature, prolonging the life of your portable soldering station.

Product Details:

Model No:- Semco SI HWM 737U= Low power digital display spot welding machine spot welding + charging 2.8KW--spot welder 2.8kw is dual mode precision spot welding & charger station comes with charging function configured with three USB ports. Each USB port supports 5V 2V for charging and monitoring. Welding thickness: 0.05-0.15mm.

Product Details:

Model No:- = Semco SI HWM 709AD+= is specifically designed for cell spot welding and can be used to weld nickel strip with thickness between 0.05mm to 0.3 mm for nickel plated steel or between 0.05mm to 0.25 mm for pure nickel strip. After the completion of Module welding Process, the next step would be soldering a BMS to it that is why Semco SI HWM 709-AD+ is equipped with a solder. For the users of continuous spot welding, a temperature sensor is built-in, the cooling system will work automatically according the internal temperature of the welder. The new no-button interface makes the operation adjustment smoother and more convenient. The real-time pulse display also provides you the machine's actual welding status.

Product Details:

 

SEMCO SI MWN 9000A-Gantry Unipolar Transistor–Pnuematic=Welding machine features: high-precision dual-axis pressurizing follow-up mechanism, real-time monitoring of abnormal alarms, strong welding ability, firm solder joints, no false welding, small sparks, and excellent surface quality;

Working conditions: ac 220v±10% 50hz;

Welding stroke: 800*400mm;

Hardware configuration: transistor welding power supply mwn-9000a,high-precision machined welding head, imported alumina brazing needle, star cylinder, intelligent precision microcomputer technology control, 5.7-inch lcd visual operation interface, simple and efficient setting, 10 sets of welding data can be stored; reserved for automatic welding equipment abnormal alarm digital interface, realizing timely alarm in case of poor welding!

Welding thickness: 0.04-0.2mm (welding time and power adjustable).

Product Details:

Model No:-Semco SI MWN 5000A Gantry, Unipolar Transistor - Pnuematic=

Product Details:

Model No:-Semco SI MWN 2500A Gantry

=The equipment has stable performance, reliable welding quality, compact and reasonable structure, small size and large power. The customer evaluates it as "fighter" in welding machine. Precision microcomputer technology control, can store a number of procedures, can be changed at will, call; the double-stage multi pulse adjustment can improve the output energy waveform, improve the welding ability and make the welding spot firm and beautiful.

Product Details:

Model No:-Semco SI CT 5V 6A 512CH - Linear=The internal structure of the two is exactly the same, but the clamps are different. The cylinder and the aluminium shell use upper and lower needles to contact, while the polymer uses a gold-plated flat clamp to clamp the tabs for punching. Different channels can be customized according to customer requirements, and the current and voltage are unified, its suitable for mass production. 

Features:
1. Automatically calculate the constant current charge ratio, capacity loss, discharge efficiency, average voltage, median voltage and other data
2. Each battery fully has its own constant current and constant voltage source, and its own loop does not affect each other.
3. Curve analysis and processing: Curve analysis function.
4. This equipment is to test battery charge, discharge and related characteristics.
5. Real time detection of each cell.
6. Multiple condition (Capacity, Time, Open circuit Voltage, discharge platform, etc.) For battery sorting.
7. The constant voltage and constant voltage charging is safe and smooth, and the voltage and current sampling output of the device is controlled through the four-wire system connection for soft start, so as to make a safe and smooth transition in the constant voltage and constant voltage charging process to avoid the occurrence of peak damage to the battery.
8. Equipment and computer interface: the Ethernet interface between the equipment and computer can ensure the stability and real-time of remote data acquisition, and the operation of the equipment can be activated by the office network and remote monitoring workshop in real time.

Product Details:

Semco SI CT 5V 3A 512CH - Linear=

The internal structure of the two is exactly the same, but the clamps are different. The cylinder and the aluminium shell use upper and lower needles to contact, while the polymer uses a gold-plated flat clamp to clamp the tabs for punching. Different channels can be customized according to customer requirements, and the current and voltage are unified, its suitable for mass production. 

Features:
1. Automatically calculate the constant current charge ratio, capacity loss, discharge efficiency, average voltage, median voltage and other data
2. Each battery fully has its own constant current and constant voltage source, and its own loop does not affect each other.
3. Curve analysis and processing: Curve analysis function.
4. This equipment is to test battery charge, discharge and related characteristics.
5. Real time detection of each cell.
6. Multiple condition (Capacity, Time, Open circuit Voltage, discharge platform, etc.) For battery sorting.
7. The constant voltage and constant voltage charging is safe and smooth, and the voltage and current sampling output of the device is controlled through the four-wire system connection for soft start, so as to make a safe and smooth transition in the constant voltage and constant voltage charging process to avoid the occurrence of peak damage to the battery.
8. Equipment and computer interface: the Ethernet interface between the equipment and computer can ensure the stability and real-time of remote data acquisition, and the operation of the equipment can be activated by the office network and remote monitoring workshop in real time.