Semco Infratech Private Limited

Model No:- Semco SI BE 9-14S 5A Capacitive=The basic principle of the active equalization technology is to use the ultra- pole capacitor as a temporary energy storage medium, charge the battery with the highest voltage to the ultra- pole capacitor, and then release the energy from the ultra- pole capacitor to the battery with the lowest voltage. equal. The constant current DC- DC technology ensures that the current is constant regardless of whether the battery is charged or discharged. The advantages of this equalization solution are asfollows:1. Each time the energy is transferred, the highest compensation is taken to the lowest, which avoids invalid charge and discharge cycles and has almost no impact on battery life.2. Cross- f low DC- DC technology ensures a constant equalization current, and will not affect the equalization ability due to the small voltage difference between the batteries.3. I t takes only two energy transfer processes to complete the equalization of the battery from high to low, and the equalization efficiency is not affected by the distance between the batteries, which greatly improves the equalization efficiency. The average efficiency is 0. 95 squared to approximately0. 9.

Model No:- Semco SI BE 17S 1.2A Inductive Active Balancer-Max Balance Current 1.2A Factory Direct Sales Near battery Balancer2S-16S Lithium/LifePO4 Battery Inductive energy transfer equalization board, high current 1.2Aenergy transfer battery voltage balancer, significantly balance battery voltage, improve the overall efficiency of the battery pack!

Model No:- Semco SI BE 17-21S 5A Capacitive Active Balancer-The purpose of an active balancer is that if you have a pack of cells with lower capacity, you can extend the life or the SoC that you have on the pack by moving energy from one cell in the pack with more energy than the other cell.

Model No:-Semco SI 8S Balance Module=Improve Battery Safety QNBBM Balancer equalize voltage for every series of batteries. Prevent all cell overcharge or over discharge. Maximum Battery performance and extend Battery life.

Model No:- Semco SI BE 10-24S 4A (Bluetooth)-Lithium Battery Equalizer = Appearance Black square Customized logo & tag Fine wires Three indicative lights on the right No external power required

Semco SI RJ8500 lithium battery core (diaphragm) breakdown analysis system is a lithium battery core, diaphragm insulation products in the heating, pressurized conditions for breakdown analysis of a (micro) short-circuit test system. The system adopts open hardware and software architecture, and provides RJ69 series pulse type Li-ion battery core short circuit tester developed by Semco, which can be programmed to control the heating and pressurization, and can store the test data automatically. It Meets the needs of laboratories, incoming material inspection, etc., to analyze the breakdown state of the diaphragm material under hot pressing condition.

Model No:- Semco SI BAL-520 is used for repair balance to restore capacity. Easy operation to restore capacity of battery pack. Repair the capacity of the battery pack, balance the voltage of each string of batteries, and solve the problems of unsatisfactory charging and power failure of the battery pack

Application Imbalance of voltage: The voltage of long used battery pack is not average. Discharging balance: It is discharging in 1A current for each series to the lowest voltage. Charging balance: It is charging with steady current for avoiding over charge. Balance discharging in second time: It is for a better balance effective if finish second discharging. Balance charging in second time: Charging with steady current.