Semco Infratech Private Limited

Semco SIT 5V 6A 8CH With Temperature ChannelsThe constant voltage and constant voltage charging is safe and smooth, and the voltage and current sampling output of the device is controlled through the four-wire system connection for soft start, so as to make a safe and smooth transition in the constant voltage and constant voltage charging process to avoid the occurrence of peak damage to the battery. High-precision calibration: charging current, discharge current, charging voltage and discharge voltage are all calibrated by agilent with high precision to ensure the accuracy of current and voltage within0.5‰; Segmental range design, in the operation of the equipment, according to the different output value of the internal intelligent adjustment of the range of the equipment, to ensure the high precision of each stage; Excellent thermal performance, unique duct design, through forced air cooling to reduce the impact of high temperature on equipment performance. The dual fan mode is adopted to carry out forced ventilation and cooling for the power cooling module, and the thermal imager is used for thermal simulation test to ensure that the cooling device works within a reasonable temperature range.

Semco SI-Y BCDS 50V (5A/10A)35CH:

1.Application Scope

Applied to electric tools, solar energy storage, twisted car, scooter, electric bicycle and other lithium battery pack cycle charging, discharging, battery pack function test and charging and discharging data monitoring integrated charging and discharging cycle test system.

2.Environmental Requirements and Technical Parameters

Single-channel power supply: AC voltage 220V±10% , frequency: 50Hz ±10%;

The whole cabinet power supply: AC voltage 380V ±10%, frequency: 50Hz ±10%;

Ambient temperature: -10～45℃;

Environment without strong vibration, no corrosive gases and flammable and explosive gas presence.

Input AC: AC 220V/110V ±10% / 50Hz/ 60Hz
Resolution: AD:16bit;DA:16bit
Input Impedance: ≥1MΩ
Input Power: 826W
Channel Features: Constant Current Source and Constant Voltage Source with Independent pairs of Closed-loop Structure

Model No.- Semco SI BCDS 70V (10/20A) (1.4kW) 1CH)- Standalone

BCDS series charge-discharge test equipment is mainly used for lithium battery charge discharge cycle test.

Available ranges: 

Semco SI HP 3554A 100V (Semco Handheld Battery Tester)

Semco SI HP 3554A 100V battery tester adopts large current and strong anti-interference design, which can provide fast, complete and accurate internal resistance and voltage diagnosis for the lead-acid battery of the backup UPS system. There is no need to stop the operation of the device, and the deterioration of the battery can be measured online and quickly diagnosed to improve the test efficiency. The built-in automatic data saving function can conveniently store test data, and the storage data can reach 2400 groups.