Semco Infratech Private Limited

Model No:- Semco SI BCDS 60V 40A 4CH Battery Charge & Discharge Cabinet Tester=Energy feedback energy-saving type. Constant current to constant voltage charging safely and smoothly. High precision Calibration method. Excellent heat dissipation performance. The channel is detachable. The built-in temperature of the device. Single box power supply. Power independent. The clamp is flexible and adjustable.

Model No:- Semco SI BCDS 70V (10/20A) 7CH-It is used for battery pack charging and discharging cycle test, battery pack function test and charge discharge data monitoring, such as electric tools, solar energy storage, torsion cars, scooters, electric bicycles, electric motorcycles and so on.

Model Number:- Semco SI BCDS 120V 30A 12CH
1.Input power AC380V±15% 50/60±5Hz
2.Power factor ≥99%(Full load)
3.THDi ≤5%(Full load)
4.Input resistance ≥1MΩ
5.Input power 50.8KW
6.Input current 77.2A/single
7.Overall system efficiency(Max) 90%
8.Noise ≤65dB

Model No:-Semco SI BCDS 100V 30A 6CH- SLB
-Voltage: 10-100V DC
-Current: 30A/60A/100A/200A DC
-Number of channels: 6CH/3CH/2CH/1CH
-Isolation of input and outpu

Model No:- Semco SI BDS 100V (20A) (1kW) 1CH=Equipment applicable scope and function introduction, BCDS Scope of application: BDS series discharge test equipment is mainly used for lithium battery discharge test. Test items include: discharge protection voltage, capacity, etc. By editing the corresponding steps, the battery can proceed according to the set process Discharge test.

Model No:- Semco SI BCDS 100V (10/20A) (14kW) 7CH-It is mainly used for charging and discharging cycle tests of finished lithium battery packs. The test items include: battery charging voltage protection, discharge voltage protection, capacity, etc. It has charging testing, discharging testing, and Loop test Functions. By editing the steps of the plan, the battery can be tested according to the set process.

Available Ranges:

Model No:- Semco SI BDS 132V 200A=PTC ceramic resistor is used to avoid red heat for a safer discharge process.  Multi-functions such as capacity test, stop discharge, parallel operation, on-line compensating discharge for complex site test.  PC software in upper computer can record and analyze the total voltage, discharge current, each cell voltage and other data, and generate the data reports accordingly, to visually show the battery group performance curve, graph, report, etc. and for printing and check.  USB interface of the tester can store the data of the discharge process into the USB flash drive, which then is imported into PC. The PC data management software can analyze the battery discharge process and generate corresponding data reports, further facilitating the data transfer and storage.  Intelligent SCM ARM control, 7-inch 1024*600 HD LCD display, capacitive touch control operation, built-in Chinese-English switch menu, and simple and clear menu operation.  Automatic stop protection function, over-temperature protection, over-voltage protection, over-current protection, reverse wiring protection, alarm prompt on screen upon any alarm stop, and automatic switch-off of the air circuit breaker.  Several discharges stop condition include battery string stop voltage, discharge capacity, discharge time to ensure safe discharge.  Online compensated charging/discharging can be carried out, and the discharge test can be carried out on the online working battery through an externally connected current clamp sensor, which greatly facilitates the testing work. This feature is especially suitable for applications where there is only a single set of backup batteries.

Model No:-Semco SI BDS 110V 20A=Passive Capacity Tester" is a wide-voltage passive capacity tester for 12V-120V battery packs. Just need connect well the battery pack but no need connects the external power supply. This instrument adopts MCU to control the center. Adopt filtering and other algorithms to calculate the current and capacity, has built-in high-power discharge load and excellent heat dissipation structure, and is designed with a full steel plate shell. The start-up and discharge buttons are integrated, and the monotonous and simple rotary button is used to rotate the cut-off voltage and discharge current. With convenience, high precision and high reliability.

Available Range: