Semco Infratech Private Limited

·       Working voltage: AC 220V±10%/ 50Hz, power: ≤800W

·       Working gas source: 0.5~0.7 MPa (dry gas)

·       Sorting efficiency: ≥ 60PPM

·       Adapt to battery specifications: 18650 finished batteries

·       Equipment weight: About 180㎏

·       Equipment qualification rate: ≥99.5%

·       Equipment utilization rate: ≥98%

·       Dimensions: 1500 (length) × 600 (width) × 1300 (height) mm

·       The frame material of the sorting machine: high-quality thick cold-rolled plate, made of     aluminium profile.

·       Sorting parameters: Open circuit voltage, AC internal resistance

·       Test accuracy: This equipment does not contain internal resistance meter

·       Gear counting: Display the number of batteries in each gear in real time

Semco SI 05C SM 32700 Five Channels Automatic Sorting Machine - Hioki 3561
Semco SI 05C SM 32700

·       Working voltage: AC 220V±10%/ 50Hz, power: ≤800W

·       Working gas source: 0.5~0.7 MPa (dry gas)

·       Sorting efficiency: ≥ 60PPM

·       Adapt to battery specifications: 32700 finished batteries

·       Equipment weight: About 200㎏

·       Equipment qualification rate: ≥99.5%

·       Equipment utilization rate: ≥98%

·       Dimensions: 1500 (length) × 600 (width) × 1300 (height) mm

·       The frame material of the sorting machine: high-quality thick cold-rolled plate, made of aluminium profile.

·       Sorting parameters: Open circuit voltage, AC internal resistance

·       Test accuracy: This equipment does not contain internal resistance meter

·       Gear counting: Display the number of batteries in each gear in real time

Model No:-SI SSWM 3X 8000A-Pnuematic=Automatic spot welding machine is a multi-axis motion controller developed by modern automation expert technology, with precision transmission and motor control mechanism, automatic walking mechanism, precision welding power supply, and effective real-time control processing automatic production equipment. Combined with the company's many years of experience in spot welding in the lithium battery industry, we develop and design for the application scenarios in the automatic welding production of lithium battery packs. The welding efficiency is high, the welding quality is good, the positioning is accurate, it is suitable for many products, the performance is stable, and the maintenance is simple and convenient. It is the first choice for automatic welding production such as lithium battery PACK welding. 

Semco SI 10C SM 32700 Ten Channels= The automatic battery cell sorting machine is professional designed for the sorting test of 18650 cylindrical lithium battery cells which have completed the capacity sorting before out of factory. With the modular design (electric control), servo motor control (actuator) and standard control components (electric circuit), the sorting machine can execute the sorting test based on the voltage and internal resistance tests before assembly.

The battery sorter machine has 8 channels for OK battery cells and 1 for NG battery cells, which greatly promote the sorting efficiency and ensure the normalization of cells sorting. While operating, the cells will be loaded and stored away by hands, which realizes the sorting automation. Furthermore, with optional barcode scanning system and sophisticated functions of test data record, query and uploading, this machine ensures the traceability and control of cells sorting.

Model Number:- Semco SI 10C SMBR 32700 Ten Channel Automatic Sorting with Bar Code Scanner – HK=Description

1. The cells sorting machine adopts new hopper type automatic feeding structure, feeding high speed and stable, no impact and scratch on the cells, direct manual feeding of the whole box, and can realize uninterrupted production.

2.18650 cells sorting detection is a part of the high accuracy and high stability of internal resistance detector, feeding part of the high speed and high stability feeding mechanism.

3. The material box of the sorting machine adopts multi-file structure, with full alarm function, and the end of the material box opens the door for quick and convenient feeding.

4. Internal resistance and voltage detection results are analysed by the computer to generate classified data for different bins. The detection system has the database function, which can query and export the historical detection data.

Model No:-Semco SI MWN 5000A Gantry, Unipolar Transistor - Pnuematic=

Model No:-Semco SI MWN 5000A Gantry, Unipolar Transistor - Fully Electric=

Semco SI-SSWM-3X- 5000A Single Side Automatic Spot-Welding Machine - Fully Electric-Automatic spot-welding machine is a multi-axis motion controller developed by modern automation expert technology, with precision transmission and motor control mechanism, automatic walking mechanism, precision welding power supply, and effective real-time control processing automatic production equipment. Combined with the company's many years of experience in spot welding in the lithium battery industry, we develop and design for the application scenarios in the automatic welding production of lithium battery packs. The welding efficiency is high, the welding quality is good, the positioning is accurate, it is suitable for many products, the performance is stable, and the maintenance is simple and convenient. It is the first choice for automatic welding production such as lithium battery PACK welding. 

MODEL NO:- SEMCO SI-DSWM-8X-5000A DOUBLE SIDE AUTOMATIC SPOT-WELDING MACHINE – PNUEMATIC=

Automatic high-precision machining two-axis press follower, Structure, Panasonic servo motor imported from Japan, imported alumina brazing needle, MCGS touch screen, Taiwan silver guide rail, module workpiece; forced water circulation cooling system; Positioning and alignment function, automatic welding current bad alarm and repair welding function. Door opening alarm system.

Model No:-Semco SI MWN 6000A Gantry, Unipolar Transistor – Pnuematic=

Model No:-Semco SI BCDS 120V 30A 4CH=Scope of equipment application: mainly used in battery production or experiments including lithium-ion batteries, lead-acid batteries, cadmium-nickel batteries, nickel-hydrogen batteries, etc. Life aging test (Circle Life Testing) and quality control. Supported test content: Battery cycle life test, battery capacity test, battery charge characteristic test, battery discharge characteristic test, battery charge retention test, battery charge and discharge efficiency test, battery overcharge, over discharge rate endurance test Wait.

Model No.-Semco SI-N GCLW 2000W=High precision lithium battery module laser welding machine has the gantry structure which can be welded in large format, and multiple sets of fixtures can be installed at the same time to weld various specifications and models of lithium battery modules. Laser welding spot is fine, high penetration, small taper, high precision; welding surface effect is smooth and no bubbles. The laser welding process is pollution-free, the heat affected zone is small, and the deformation is small. The water-cooling system is adopted to ensure the life of the laser device. High-definition CCD monitoring screen and red-light positioning indicator make the software editing process easy and convenient. Stable performance of industrial PC, welding system software operation is simple and easy to learn.

Available Range:

Model No:- Semco SI MWN 8000A Gantry, Unipolar Transistor - Fully Electric

SEMCO SI MWN 9000A-Gantry Unipolar Transistor–Pnuematic=Welding machine features: high-precision dual-axis pressurizing follow-up mechanism, real-time monitoring of abnormal alarms, strong welding ability, firm solder joints, no false welding, small sparks, and excellent surface quality;

Working conditions: ac 220v±10% 50hz;

Welding stroke: 800*400mm;

Hardware configuration: transistor welding power supply mwn-9000a,high-precision machined welding head, imported alumina brazing needle, star cylinder, intelligent precision microcomputer technology control, 5.7-inch lcd visual operation interface, simple and efficient setting, 10 sets of welding data can be stored; reserved for automatic welding equipment abnormal alarm digital interface, realizing timely alarm in case of poor welding!

Welding thickness: 0.04-0.2mm (welding time and power adjustable).

Semco SI 10C SM 32700 Ten Channels Automatic Sorting Machine - HK 3561

Model Numbers=Semco SI CCD Tester-

For Lithium Ion Battery-CCD solder joint detector is an automatic equipment for lithium battery processing, which has the functions of automatic positive and negative pole detection, positive and negative solder joint detection, solder joint defect differentiation, automatic discharge, etc.
Features1. Through the CCD computer system, set the measurement mode, accuracy parameter range, adjust each parameter, and the equipment starts to monitor and enter the working state.2. Action process: manual loading of the whole box of batteries-start CCD detection button-CCD system analysis-CCD system discrimination (OK/NG)- receiving personnel. 3. The equipment is required with a sound and light alarm, fault alarm, etc. The operating parameters can be freely set according to the actual requirements of customers.4. Clean, no strong electromagnetic interference.5. Adapt to battery specifications: Many kinds of finished product Batteries Polarity detection

• Model No:-Semco SI BCT 100 200A=In response to the production and testing needs of these rechargeable batteries, Semco has brought a special comprehensive rechargeable battery tester. This tester can make a quantitative and accurate measurement of some basic parameters of the battery, and can measure the open circuit voltage of the battery. Resistance, charge, discharge performance, battery capacity, especially for Lithium battery functions, such as overcharge protection, over discharge protection, over current protection, short circuit protection and other functions, and the corresponding values have been measured, which greatly facilitates battery production Work with pre-sales and after-sales services, you can intuitively judge the performance and quality of the battery in a few simple steps, and also have a quick screening function, you can set the upper and lower limits of the measurement parameters, you can easily from a batch Defective batteries are quickly detected in the finished battery to improve production efficiency. In addition, some special functions are added to make it have some characteristics of general instruments and equipment, which expands the flexibility of the equipment and has the characteristics of a wide range of applications.

SEMCO SI-DSWM-6X-5000A Double Side Automatic Spot Transistor Welding Machine – Pneumatic=The function of welding process is as follows:

1.3.1 Manually push in the battery pack fixture Automatic operation function when in place.

Automatic Operation Function of Battery Packaging Tool after Manual Pushing in Position

1.3.2 Electric positioning and pressing/compression function Features.

1.3.3 Double-sided simultaneous automatic spot-welding function

1.3.4 Manual 90-degree change of welding head Features (to be customized).

1.3.5 Laser positioning and alignment Features.

1.3.6 Optional front and back discharge functions. Optional pre-discharge and post-discharge functions

1.3.7 Wired remote control function of movable man-machine.

1.3.8 Automatic poor welding current alarm and repair welding function. (This function is available

when supporting high frequency inverter and transistor welding power supply)