Semco Infratech Private Limited

Product Details:

Model No:- Semco SI BMST 1-16S (40A/120A) Single Unit Only=

 

Product Details:

SEMCO SI BMST 1-16S With Cabinet

Product Details:

Model No:- Semco SI BMST 1-24S (100A/200A) With Cabinet=It is mainly used to detect whether the functional indicators of the lithium battery protection board are within the parameter range, so as to provide a set of detection standards for the staff. It is mainly used for testing power battery protection board of protection board manufacturer and power battery manufacturer.

Performance Routine Test Items: Overcharge protection voltage, overcharge recovery voltage, over discharge protection voltage, over discharge recovery voltage, over-current protection, over-current delay performance test, short-term protection performance test, total self-consumption current of protection board, etc.Special Test Items: Single section self-consumption test (refers to the true and accurate self-consumption of each section). Special Test Items: Single section self-consumption test (refers to the true and accurate self-consumption of each section).

Product Details:

Model Numbers available=Semco SI BMST 1-32S (40A/150A) With Cabinet=Routine test items: Internal resistance test, overcharge and over discharge test, overcharge recovery and over discharge recovery test, over current test (charge over current and discharge over current).

Unique test items: Short-circuit protection test (refers to the real short-circuit protection test in microseconds). Single cell self-consumption test (refers to the true and accurate self-consumption of each cell). Equalization current and equalization voltage (can accurately capture equalization current and equalization opening voltage).

Types of protection boards that support testing: Lithium iron phosphate, ternary lithium cobaltate, lithium manganate, lithium titanate, etc. Use the computer host computer to support the barcode scanning function, and automatically save the test data.

Product Details:

Model No:- Semco SI BMST 1-32S (60A/120A) With Cabinet = mainly used to detect whether the functional indicators of the power battery protection board are in the parameter range in order to provide staff with a set of testing standards. It is mainly used to test the power battery protection board of the protection board manufacturer and the power battery manufacturer.

Product Details:

 

Semco SI BMST 1-16S Single Unit Only=
Platforms supporting the BMS lifecycle. A Battery Management System (BMS) is an embedded unit performing critical battery functions, including cell monitoring and balancing, pack charge and discharge control, safety, and communications.

Product Details:

Model No:- Semco SI BMST 1-24S Single Unit Only=Internal resistance test, overcharge and over discharge test, overcharge recovery and over discharge recovery test, over current test (charge over current and discharge over current).Unique test items: Short-circuit protection test (refers to the real short-circuit protection test in microseconds). Single cell self-consumption test (refers to the true and accurate self-consumption of each cell). Equalization current and equalization voltage (can accurately capture equalization current and equalization opening voltage).Types of protection boards that support testing: Lithium iron phosphate, ternary lithium cobaltate, lithium manganate, lithium titanate, etc. Use the computer host computer to support the barcode scanning function, and automatically save the test data.

Product Details:

Model No:- Semco SI BE 16S 1.2A Inductive Active Balancer= Max Balance Current 1.2 A Factory Direct Sales Near battery Balancer2S-16S Lithium/LifePO4 Battery Inductive energy transfer equalization board, high current 1.2 A energy transfer battery voltage balancer, significantly balance battery voltage, improve the overall efficiency of the battery pack!

Product Details:

Model No:- Semco SI BMST 1-24S (50A/120A) With Cabinet=Battery Management System Tester with Computer and Cabinet is a critical module in electric vehicle that continuously monitors the battery health, balances the cell voltages. It also protects cell from over & under voltages, temperatures, current for safety & thermal management.

Product Details:

Main Feature of this machine is:

1. Can Charge / Discharge of Prismatic cell upto 5V with upto 100A for capacity grading.

2. Machine can Controle by Software.

3. Steps have CC-CV/CC/CV/CCD/CP etc.

4. Easly can export the data in excel form and can save the with minimum time.

Product Details:

Model No:-Semco SI CT 5V 30A 16CH=This Equipment also can be used in pilot run period and in quality assurance department for prismatic cell grading capacity, testing prismatic cells Charging and Discharging group, and processing test data, etc. 

Product Details:

Model No:-Semco SI BE 12-16S 5A Capacitive-

Port Description1. B-, B1, B2, B3, and B4 are the nodes of each battery;2. The two pads marked "EN/RUN" on the board silk screen are shorted by default, so that the equalizing board will enter the equalizing working state after powering up, or you can disconnect the lead and add a switch to control the equalizing work;3. The EN/RUN indicator light indicates the continuous working status of the equalization, and it will go out only when the battery under voltage protection or the equalization board is faulty;4. The on-board sequence of the balanced board is generally from B-→B1→B2→B3→B4, from the low string to the high string one by one Connection: The connection diagrams are all the highest strings drawn. You can connect as many strings as you actually need, and the rest can be left floating

Product Details:

Modular manufacturing, strong versatility and easy maintenance.- Using the four-wire method to measure, improve the test accuracy and high.- Each battery channel has a completely independent constant current and constant voltagesource, and the self-contained loop does not affect each other.- The equipment adopts the control method of sending the whole machine process.- The sampling speed is fast, and the inspection time of the whole cabinet is less than or equalto 3S.- Complete WINDOWS platform software, powerful software, friendly man-machine interface,easy to operate. The host computer can set up to 32 steps and 256 cycles, and eachformation step can be selected from four attributes, including constant current charging,constant voltage charging, constant current discharging, and sleep.- It can draw the dynamic curve of the process of converting each battery into capacity in realtime, including voltage/time curve, current/time curve, capacity/time curve, energy/timecurve, capacity/voltage curve and other function menus.- LED indicator light is used to indicate the working status of the battery.- Communication method: RS485.- Each host computer can monitor up to 20 devices, and it is recommended to monitor 10devices.- With data power-off protection function, the incoming power continues to run.- The software has the functions of editing and modifying the content process library files,creating new monitoring, opening and closing documents, printing and setting functions.

Product Details:

Model No:-Semco SI BE 16S 2A BT- 16S 2A Bluetooth Active Balancer=Battery Active Equalizer SI BE 16S 2A BT is a balanced solution for large-capacity series lithium battery packs Management system. The equalizer uses a supercapacitor as a medium to achieve active energy transfer equalization. The equalizer is suitable for 2 to 16 strings of battery packs with voltage acquisition and equalization. The equalizer works for 1A The equalized current is used for energy transfer, and the equalization current does not depend on the voltage difference of the series connected cells in the battery pack. Voltage acquisition range1 V ~ 5V, accuracy ± 3mV. Applicable to all kinds of batteries on the market such as lithium iron phosphate, ternary lithium, titanic acid, lithium lead acid, etc. The equalizer has Bluetooth communication function and is equipped with mobile APP software. Can be viewed via Bluetooth connected equalizer Single cell voltage, view equalization status, modify setup parameters, etc. Can be applied to small sightseeing cars, scooters, enjoy battery, battery power, base station backup power, solar power station and other products in the battery PACK, can also be used for batteries Balance maintenance, repair and other occasions.

Product Details:

 

Model No:- Semco SI BCDS 60V 40A 4CH=Battery Charge & Discharge Cabinet Tester=Energy feedback energy-saving type. Constant current to constant voltage charging safely and smoothly. High precision Calibration method. Excellent heat dissipation performance. The channel is detachable. The built-in temperature of the device. Single box power supply. Power independent. The clamp is flexible and adjustable.

 

Product Details:

Main functions of the equipment• Modular manufacturing, strong versatility and easy maintenance.• Using the four-wire method to measure, improve the test accuracy and high.• Each battery channel has a completely independent constant current and constant voltagesource, and the self-contained loop does not affect each other.• The equipment adopts the control method of sending the whole machine process.• The sampling speed is fast, and the inspection time of the whole cabinet is ≤6S.• Complete WINDOWS platform software, powerful software, friendly man-machine interface,easy to operate. The host computer can set up to 32 steps and 256 cycles, and each formationstep can be selected from four attributes, such as constant current charging, constant voltagecharging, constant current discharging, and sleep.• It can draw the dynamic curve of the process of converting each battery into capacity in realtime, including voltage/time curve, current/time curve, capacity/time curve, energy/timecurve, capacity/voltage curve and other function menus.• LED indicator light is used to indicate the working status of the battery.• Communication method: RS485.• Each host computer can monitor up to 10 devices.• With data power-off protection function, the incoming power continues to run.• The software has the functions of editing and modifying the chemical composition processlibrary file, creating new monitoring, opening and closing documents, printing and setting Functions.

Product Details:

Main functions of the equipment• Modular manufacturing, strong versatility and easy maintenance.• Using the four-wire method to measure, improve the test accuracy and high.• Each battery channel has a completely independent constant current and constant voltage source,and the self-contained loop does not affect each other.• The equipment adopts the control method of sending the whole machine process.• The sampling speed is fast, and the inspection time of the whole cabinet is ≤6S.• Complete WINDOWS platform software, powerful software, friendly man-machine interface,easy tooperate. The host computer can set up to 32 steps and 256 cycles, and each formationstep can beselected from four attributes, including constant current charging, constant voltage charging,constant current discharging, and sleep.• It can draw the dynamic curve of the process of converting each battery into capacity in real time,including voltage/time curve, current/time curve, capacity/time curve, energy/time curve,capacity/voltage curve and other function menus.• LED indicator light is used to indicate the working status of the battery.• Communication method: RS485/WIFI.• Each host computer can monitor up to 10 devices.• With data power-off protection function, the incoming power continues to run.• The software has the functions of editing and modifying the chemical composition process library file,creating new monitoring, opening and closing documents, printing and setting functions.

Product Details:

Modular manufacturing, strong versatility and easy maintenance.- Using the four-wire method to measure, improve the test accuracy and high.- Each battery channel has a completely independent constant current and constant voltagesource, and the self-contained loop does not affect each other.- The equipment adopts the control method of sending the whole machine process.- The sampling speed is fast, and the inspection time of the whole cabinet is less than or equalto 3S.- Complete WINDOWS platform software, powerful software, friendly man-machine interface,easy to operate. The host computer can set up to 32 steps and 256 cycles, and eachformation step can be selected from four attributes, including constant current charging,constant voltage charging, constant current discharging, and sleep.- It can draw the dynamic curve of the process of converting each battery into capacity in realtime, including voltage/time curve, current/time curve, capacity/time curve, energy/timecurve, capacity/voltage curve and other function menus.- LED indicator light is used to indicate the working status of the battery.- Communication method: RS485.- Each host computer can monitor up to 20 devices, and it is recommended to monitor 10devices.- With data power-off protection function, the incoming power continues to run.- The software has the functions of editing and modifying the content process library files,creating new monitoring, opening and closing documents, printing and setting functions.

Product Details:

Model No:- Semco SI BE 9-14S 5A Capacitive=The basic principle of the active equalization technology is to use the ultra- pole capacitor as a temporary energy storage medium, charge the battery with the highest voltage to the ultra- pole capacitor, and then release the energy from the ultra- pole capacitor to the battery with the lowest voltage. equal. The constant current DC- DC technology ensures that the current is constant regardless of whether the battery is charged or discharged. The advantages of this equalization solution are asfollows:1. Each time the energy is transferred, the highest compensation is taken to the lowest, which avoids invalid charge and discharge cycles and has almost no impact on battery life.2. Cross- f low DC- DC technology ensures a constant equalization current, and will not affect the equalization ability due to the small voltage difference between the batteries.3. I t takes only two energy transfer processes to complete the equalization of the battery from high to low, and the equalization efficiency is not affected by the distance between the batteries, which greatly improves the equalization efficiency. The average efficiency is 0. 95 squared to approximately0. 9.

Product Details:

Model No:- SI CDM 100V 30A (Portable)=FGCD series tester adopts advanced charging and discharging technology with a variety of built-in test and maintenance modes, which are suitable for the discharge, charging and discharge-charge cycle tests of various lithium battery packs on the market.

Product Details:

Model Number:-SEMCO SI BQT 1-24=Battery internal resistance tester (T685)/Test Accessories (1 Test Wires + 2 Test Connector)/Portable IR Tester 3563 100V - Battery Test Device -Attachment Clip/Portable IR Tester 3563 100V - Battery Test Device -Attachment Probe/Portable IR Tester 3563 100V - Battery Test Device -Attachment Jig is the handheld lithium battery quick tester, it can detect up to 24cells' voltage in same time, and meanwhile, system will do data analysis and show the test result quickly.

Product Details:

Model No:-Semco SI BB 32S 10A=Support the charge and discharge current. The charge and discharge port supports 20A+ 50ADisplay function and touch handling Displays all individual battery voltages and can touch the handling Support battery serial number 1 to 32 strings Support balanced current The 1 to 10A current is adjustable power consumption at full load ≥500W for LFP and ≥600W for NMC Support battery types Lithium-ion battery Functions Support for multi-machine series use Temperature protection function The product reaches the internal 50 degrees temperature automatic control function Pressure deviation accuracy 0.000V differential pressure control Equipment working voltage DC12VProtection method The machine has its own instant error protection, super string connection, reverse connection can be protected Protection measures Fuses and built-in self-developed protection module Pressure balancing function Support the maximum pressure differential accuracy of 0.000control for fixed pressure balance function.

Product Details:

Model No:- Semco SI BDS 100V (30A) (3kW) 1CH=Discharge function: Have Constant current discharge function. Check voltage protection: By charging and discharging the battery, it can be detected whether the battery’s discharge protection is working. Record discharge capacity: Discharge the battery and save the display discharge capacity. Safety protection: Anti-reverse connection protection function; Safe discharge current protection. Continue test function: Power-down continued test function.

Product Details:

Model No:- Semco SI-S ES 5V 10A 192CH=Different channels can be customized according to customer requirements, and the current and voltage are unified, its suitable for mass production. *Each channel can be started and stopped at a single point, and the response speed is fast.*The operation is simple, convenient and intuitive*Modular design, easy to maintain.*The digital current and voltage automatic calibration function*Using network connection and SQL database*The hardware technology is advanced, stable and durable. 

Product Details:

Model No:- Semco SI BDS 100V (20A) (1kW) 1CH=Equipment applicable scope and function introduction, BCDS Scope of application: BDS series discharge test equipment is mainly used for lithium battery discharge test. Test items include: discharge protection voltage, capacity, etc. By editing the corresponding steps, the battery can proceed according to the set process Discharge test.

Product Details:

Semco SI BCDS 75V 40A 4CH=
1.Equipment characteristics Energy Feedback Energy-Saving Type, There is energy saving during the test (80%), theeffect of discharge feedback (75%), heat is small, so as to achieve the purpose of energysaving and cost reduction for users Constant Current to Constant Voltage Charging Safely and Smoothly, The voltage andcurrent of the device are connected in a four-wire system, and the voltage and current loopsare independently designed to ensure a safe and smooth transition during the constantcurrent to constant voltage charging process to avoid damage to the battery due to spikes High Precision Calibration Method, The charging current, discharging current, chargingvoltage and discharging voltage are all calibrated with high precision by Agilent to ensure thatthe accuracy of current and voltage is within 0.5 Excellent Heat Dissipation Performance, Unique air duct design, through forced aircooling to reduce the impact of high temperature on equipment performance. Adopt dual-fanmode, perform forced air cooling on the power cooling module, and use thermal imager forthermal simulation test to ensure that the radiator works within a reasonable temperaturerange  The Channel is Detachable, Various channels in the same box can be freely connected inparallel according to needs to be compatible with multiple types of battery tests, give full playto the multiple functions of the equipment, and save equipment costs for customers The Built-in Temperature of The Device, Each channel can be customized according toneeds, with one main temperature without external auxiliary temperature (with multiplechannels, the temperature needs external auxiliary temperature), Monitor the batterytemperature in real time, so as to monitor and protect the normal safety test of the batteryaccording to the temperature change  Single Box Power Supply, Each cabinet of the whole cabinet is powered  toensure the stability and safety of the power supply of the whole cabinet;

Product Details:

Model No:- Semco SI BPVA 1-16S=Small size and easy to carry: Hand-held intelligent tester easy to operation know easily.

Product Details:

1.Interface: micro-computer touch panel and self-developed system, easy to operate and friendlywith maintenance.

2. Testing Mechanics: pure copper probe to reduce errors.

3. Mechanics: precision servo to locate accurately and run effectively.

4. Manipulator applied to distribute the battery cell, safe and smooth.

Precision -  0.001V、0.1mΩRange Voltage:- 0~5V Impedance:0~200mΩChannels - 9 OK+1 NGAir source -  0.6-0.8Mpa

Product Details:

Model No:- Semco SI BCDS 99V 20A 1CH - Semco Battery Charge & Discharge Cabinet-is integrated with the function of a high-precision capacity series discharging test and high-precision series charging test. With a wide voltage testing range from 9V to 99V which make it can test varieties of batteries from 12V-84V. Charging test and discharge test can be performed for lead-acid batteries, lithium batteries and other types of batteries. The maximum charge & discharge cycle index is 16 times, which can also be used as the aging equipment in the battery production. The device provides two operation modes: Panel and Software. After installing the specified software, the device can be managed and operated through the computer: charge-discharge setting, data sampling, test report imports and export, test data analysis, charge-discharge curves drawing. One computer can manage multiple devices simultaneously through a switch.

Product Details:

 

Model No:-SEMCO SI 05C SM 32700 Five Channels Automatic Sorting Machine - Hioki 3561

 

Product Details:

Model No:-SEMCO SI BCT 100 120A=Lithium battery comprehensive test equipment is a device for quickly and accurately testing the performance of the finished battery. The system adopts 32Bit ARM Processor, voltage and current adopt 16Bit AD. The converter has faster test speed and higher test accuracy than similar devices, and supports simultaneous operation of multiple devices. Widely used in the production and scientific research experiment test of power battery packs such as automotive electronics, aerospace, ships, solar energy storage, electric bicycles, electric motorcycles, backup power batteries, communication power supplies, etc. Test items: Open circuit voltage, AC internal resistance, and discharge test, discharge over current test, short circuit protection test, and charge test, charge protection test, etc.

Product Details:

Model No:-Semco SI BCDS 60V 20A 8CH=Equipment characteristics:-Energy feedback energy-saving type, there is energy saving during the test (80%), the effect of discharge feedback (75%), heat is small, so as to achieve the purpose of energy saving and cost reduction for users; Constant current to constant voltage charging safely and smoothly, the voltage and current of the device are connected in a four-wire system, and the voltage and current loops are independently designed to ensure a safe and smooth transition during the constant current to constant voltage charging process to avoid damage to the battery due to spikes;
 High precision Calibration method, the charging current, discharging current, charging voltage and discharging voltage are all calibrated with high precision by Agilent to ensure that the accuracy of current and voltage is within 0.5‰.

Product Details:

Model No:- Semco SI BDS 132V 200A=PTC ceramic resistor is used to avoid red heat for a safer discharge process.  Multi-functions such as capacity test, stop discharge, parallel operation, on-line compensating discharge for complex site test.  PC software in upper computer can record and analyze the total voltage, discharge current, each cell voltage and other data, and generate the data reports accordingly, to visually show the battery group performance curve, graph, report, etc. and for printing and check.  USB interface of the tester can store the data of the discharge process into the USB flash drive, which then is imported into PC. The PC data management software can analyze the battery discharge process and generate corresponding data reports, further facilitating the data transfer and storage.  Intelligent SCM ARM control, 7-inch 1024*600 HD LCD display, capacitive touch control operation, built-in Chinese-English switch menu, and simple and clear menu operation.  Automatic stop protection function, over-temperature protection, over-voltage protection, over-current protection, reverse wiring protection, alarm prompt on screen upon any alarm stop, and automatic switch-off of the air circuit breaker.  Several discharges stop condition include battery string stop voltage, discharge capacity, discharge time to ensure safe discharge.  Online compensated charging/discharging can be carried out, and the discharge test can be carried out on the online working battery through an externally connected current clamp sensor, which greatly facilitates the testing work. This feature is especially suitable for applications where there is only a single set of backup batteries.

Product Details:

Model No:- Semco SI BE 17S 1.2A Inductive Active Balancer-Max Balance Current 1.2A Factory Direct Sales Near battery Balancer2S-16S Lithium/LifePO4 Battery Inductive energy transfer equalization board, high current 1.2Aenergy transfer battery voltage balancer, significantly balance battery voltage, improve the overall efficiency of the battery pack!

Product Details:

Model No:- Semco SI BDS 110V 100A=Support RS232 real time monitoring by PC or SD Card download data after discharge.• Battery String voltage is 80- 110V 110Vers can decide how to set single battery voltage.• Easy to operate: All input is simple English menu, humanized operation, clear procedure, every step and interface will give user brief tips avoid incorrect operation fundamentally.• It can be hung and used for any large volume battery to test the actual volume.• Providing data management, print, analyze, count report, automatic generate test report.• Amplify or minify the voltage curve for easy observation.

Product Details:

Model Number:- Semco SI BCDS 120V 30A 12CH
1.Input power AC380V±15% 50/60±5Hz
2.Power factor ≥99%(Full load)
3.THDi ≤5%(Full load)
4.Input resistance ≥1MΩ
5.Input power 50.8KW
6.Input current 77.2A/single
7.Overall system efficiency(Max) 90%
8.Noise ≤65dB

Product Details:

Semco SI ES 5V 3A 512CH - Energy Saving=Capacity grading machine, is not only the very first machine to charge new-made lithium-ion cells (which is called formation), but also the first machine to grade and sort cells before making a lithium-ion battery pack.
By running cycles of CV-CC charging, rest, CC discharging, rest, then again CV-CC charging, this capacity grading machine can measure multiple parameters of each cell, like capacity, open-circuit voltage, cut-off electricity consumption…etc.  After sorting all cells with certain criteria, we can use those cells with closest electrical performances to assemble battery packs. Only then we can maximize capacity and lifespan of the battery pack.
This machine adopts modular design and has a total capacity of 512 points. In other words, it supports grading maximum 512 cells by one time of running.

Product Details:

Model No:- Semco SI BE 24S 5A =Lithium Battery Equalizer series tester is an intelligent and efficient lithium battery equalization maintenance instrument, which is used to quickly solve the problem of inconsistent voltage of lithium battery pack. Meanwhile it supports making the voltage difference of any battery, which can be used for research and development experiments to simulate what problems will occur when the battery reaches the maximum voltage difference under harsh working conditions. It is suitable for various types of lithium battery packs and is the best tester for battery manufacturers and distributors.

Product Details:

Model No:-Semco SI CT 5V 20A 8CH=can be used for capacity test, charge and discharge test, capacity grading and matching, balance charging, etc. of various types of Li-ion Batteries, Ni-mH batteries, Ni-CD batteries. SI CT 5V/20A 8CH isolation detection technology can determine the location of the bad cells without disassembling the battery pack, then replace it. It can even charge and discharge the unbalanced battery pack to balance the battery and restore the battery pack to normal balance. It’s suitable for lithium battery detection, maintenance, regeneration, pack assembling and EV battery regrouping, etc.

Product Details:

Model Number:-Semco SI-D ES 5V 30A 64CH-
Semco provides complete solutions for battery cells inspection. The cells can be measured to check dimensional characteristic, safety conditions, and electrical functional parameters. Different customized solutions can be proposed, depending on the type of cells (prismatic, cylindrical or pouch) and the requirements for integration in the manufacturing line.