Semco Infratech Private Limited

Semco SI-A 5CH SM (18650/21700/26650/32700)
Semco SI-A 5CH SM (18650/21700/26650/32700)- With Hioki 3561

The battery internal resistance, voltage and other parameters are set through the human-machine interface software, and the PLC automatically completes the following functions: Manual battery filling → loading wheel feeding → test cylinder testing and sorting (tester uploads data, software sorting) → belt conveyor battery → push cylinder to sort cells to designated stalls ;The equipment is equipped with sound and light alarms, which can complete automatic shutdown, full material alarm, fault alarm, etc. after sorting. The operating parameters can be set according to the actual requirements of the customer.

SIB ES 5V 3A 512CH (Energy-Saving):

Numbers of device channels 512 channels, Working flow control method Overall machines control, Charges mode Constant current, constant voltage, Charges terminated conditions Voltage, current, time, capacity, Discharges mode Constant current, Discharges terminated Conditions Voltage, time, capacity, Over voltage, lack of voltage, over current lack of current over capacity protection, Reverse wiring protection, Outage Protection. data break point recovery, Maximum can Seats 32 steps and 256 cycle, Sampling inspection cycle ≤2s, Minimum data record frequency ≤4s, Equipment conversion efficiency Charges ：75% Discharges: ：70%, Adopts precise instrument purpose amplifier Current automatic calibratetechnology Software calibration cancel potentiometer calibration, Matching with internal resistance testing and battery sorting system, realize battery sorting.

Semco SI BB 32S 10A (Semco Battery Balancer)

 

Semco SI-L 13C MFSM (Semco SI-L 13C MFSM- Multi-function Cell sorting machine 18/21/26/32 )-With Hioki 3561)

The universal cell thirteen-speed one-measurement sorting machine is suitable for 32700, 32650, 26650, 18650 pointed and flat cells to conduct voltage and internal resistance sorting tests. The electrical control part of the sorting system adopts a modular design, with high integration, good general purpose and convenient maintenance; the actuator is controlled by stepper/servo motor, with high precision and good reliability. The number of receiving troughs in the equipment is 13, and the voltage and internal resistance value can be set arbitrarily. The sorting efficiency is high, and the battery can be accurately sent to the specified gear according to the set internal resistance and voltage value. The equipment adopts silo-type feeding, the cylinder automatically discharges the material, and the personnel manually receive the material. It truly realizes the automation of cell sorting.

Semco SIT BCDS-V 100V 100A 2CH- With RS 485 + CAN & Temperature:

Equipment features
Energy feedback energy saving During the test, the battery has energy saving effect (90%), discharge feedback effect (88%), and low heat generation, thus achieving energy saving and cost reduction for users.
Safe and smooth transition from constant current to constant voltage charging- The voltage and current of the device adopt a four-wire connection method, and the voltage and current loops are designed independently, so that the constant current to constant voltage charging process can be safely and smoothly transitioned to avoid damaging the battery due to spikes
High-precision calibration method - The charging current, discharging current, charging voltage and discharging voltage are all calibrated with high precision by Agilent to ensure that the accuracy of current and voltage is within 0.5‰ 
Excellent heat dissipation performance- The unique air duct design reduces the impact of high temperature on equipment performance through forced air cooling. The dual-fan mode is used to force air extraction and cooling of the power cooling module, and a thermal imager is used for thermal simulation testing to ensure that the cooling device works within a reasonable temperature range

Semco SI-H BCDS 100V 60A 4CH

·       Modular design, single-point control technology, convenient expansion, high production and maintenance efficiency

·       Battery cycle life test

·       Battery charge/discharge characteristic test

·       Battery charge retention ability test

·       Battery charge/discharge efficiency test

·       Battery overcharge/over discharge rate endurance test

·       Support CAN communication to realize data docking with BMS

·       Support docking with MES system

·       Auxiliary channel acquisition and recording

·       Static test, dynamic test, standstill

·       With anti-reverse connection, data loss protection function

·       Support multi-channel parallel

·       Feedback efficiency 92%

·       Charge and discharge power factor 0.99 (rated power)

 

Semco SI-D ES 5V 20A 192CH - (18650-33140):

Product name: Rechargeable battery detection chemical composition equipment. Product Model: Semco SI-D ES 5V 20A 192CH - (18650-33140) Channel parameters: 192channels, voltage 5V, charging current 20A, discharge current 20A. Product specifications: Energy-saving feedback type, open-frame cylindrical 18, 21, 26, 32, 34 batteries are dedicated. Equipment Model: Semco SI-D ES 5V 20A 192CH - (18650-33140). Equipment structure: The fixture adopts a quick push clip design, and the battery is placed on both sides; Reference dimensions of single-layer equipment (mm): length 1596mm, width 500mm, height 1840mm; Note: The clamp part is designed with a quick push clamp, which is compatible with cylindrical 18, 21, 26, 32, 33, and 34 series batteries. The height of the clamp can be adjusted within a range of 60- 140mm.

Semco SI-D ES 5V 60A 64CH- (Prismatic & Pouch) Cell Grading Machine  (Semco SI-D ES 5V 60A 64CH)

Equipment structure: The fixture adopts the overall automatic pressing method design, and the battery is placed on both sides;

Reference dimensions of single-layer equipment (mm): length 1064, width 1000, height 1840 (for reference, subject to the actual equipment);

Semco SI-TL BCT 100V 300A

Comprehensive test equipment for lithium battery PACK is a fast and accurate device for testing the performance of finished batteries. The main test items are: no-load voltage, AC internal resistance, charging current, charging voltage, discharging current, load voltage, overcurrent protection current, and overcurrent recovery voltage. Test of short circuit protection time. The system uses a 32-bit ARM processor, and the voltage and current use 16-bit AD converters. Compared with similar devices, the test speed is faster, the test accuracy is higher, and multiple devices can be operated simultaneously. Widely used in automotive electronics, aerospace, marine, solar energy storage, electric bicycles, electric motorcycles, backup power batteries, communication power and other power battery pack production and scientific research experimental testing.

Applied to the safety testing of lithium battery protection boards, it detects whether various functional indicators of the protection board are within a reasonable parameter range, provides a set of testing standards for staff, which is conducive to improving production efficiency, facilitating quality control, and is compatible with common types of protection boards on the market, such as positive electrode in the same port (sub port), negative electrode in the same port (sub port), positive electrode charging and negative electrode discharging. This product is mainly used in production testing, incoming material testing, quality control, research and development testing, and other aspects.

Semco SI PI 18650-21700 Semco SI PI 18650-21700 cylindrical battery 18650/21650/21700 universal Highland barley papermachine is a kind of automatic equipment for cylindrical battery highland barley paper.This equipment is controlled by PLC stepping motor and cylinder to complete the function of thepositive electrode of 18650/21650/21700 finished electric cell sticking highland barley paper, andthe number of cylinders finished electric cell is about 4000 per hour. The mechanical structuredesign is simple and generous, and the system performance is stable. In the current market, so farone of the most cost-effective cylindrical battery highland barley paper equipment.

Y Battery Management System 1-24S (60A/120A) With CAN Connection  &Temperature sensing:
Applied to the safety test of the lithium battery protection board, to detect whether the functional indicators of the protection board are within the reasonable parameter range, and to provide the staff with a set of testing standards, which is conducive to improving production efficiency and facilitating quality control. It is compatible with common protection boards on the market Type, same port for positive pole (separate port), same port for negative pole (separate port), positive charging and negative charging, etc. This product ismainly used in production testing, incoming material testing, quality control, R&D testing, etc.

Semco SI BCDS-V 60V 20A 8CH:

1.Equipment characteristics

v  Energy feedback energy-saving type, there is energy saving during the test (80%), the effect of discharge feedback (75%), heat is small, so as to achieve the purpose of energy saving and cost reduction for users;

v  Constant current to constant voltage charging safely and smoothly, the voltage and current of the device are connected in a four-wire system, and the voltage and current loops are independently designed to ensure a safe and smooth transition during the constant current to constant voltage charging process to avoid damage to the battery due to spikes;

v  High precision Calibration method, the charging current, discharging current, charging voltage and discharging voltage are all calibrated with high precision by Agilent to ensure that the accuracy of current and voltage is within 0.5‰;

v  Excellent heat dissipation performance, Unique air duct design, through forced air cooling to reduce the impact of high temperature on equipment performance. Adopt dual-fan mode, perform forced air cooling on the power cooling module, and use thermal imager for thermal simulation test to ensure that the radiator works within a reasonable temperature range;

Semco SI-B CT 5V 10A 16CH

Semco SI-B CT 5V 60A 8CH  (Prismatic & Pouch):
Product Model Code Semco SI-B CT 5V 60A 8CH (Prismatic & Pouch) channel voltage/current 5V/60A Channel number 8 Input power Three-phase five-wire connection AC380V ±10%/50Hz Max input power 3KW Noise ≤75dB Power factor of the whole machine ≥0.99(Load power is more than 30% of full load power) THD of whole machine THD≤5% Efficiency The conversion efficiency of each link is greater than85%

Model No:- Semco SI BB 24S 10A

Semco SI-B BCDS 30V 10A 32CH

Semco SI-Y BMST 1-6S (60A/120A) single unit only:
Applied to lithium battery protection plate safety testing, testing the protection plate functional indicators are within reasonable parameters, providing staff with a set of testing standards, improving production efficiency, and facilitate quality control. Compatible with the common types of protection plate on the market: positive with the port (split port), negative with the port (split port), positive charging protection negative discharge protection, and so on. The product is mainly used in production testing, incoming material testing, quality control, R & D testing, etc.

Scope of application: mainly used to detect whether the functional indicators of the power battery protection board are in the parameter range in order to provide staff with a set of testing standards. It is mainly used to test the power battery protection board of the protection board manufacturer and the power battery manufacturer. Features: PBTS protection board test system, divided into two types: quick test and precise test Accurate testing: It can accurately detect the precise value of each functional parameter of the power battery protection board (the error is 5mv), which is convenient for the debugging and development of samples, and provides a set of standards for rapid testing to R&D personnel. Quick test: According to the design parameters of the protection board, set the test parameters for quick test, which is convenient for the protection board manufacturers and power battery manufacturers to quickly test and ship on a large scale. At the same time, it is suitable for various hardware schemes and part of the software scheme protection board test.

Semco SI-ZP BCDS 100V 30A 2CH- Semco Portable Battery Charge & Discharge Cabinet:
1. Equipment model 1. Equipment model Semco SI-ZP BCDS 100V 30A 2CH 2. Environmental conditions 1. Temperature Range of working temperature 0℃～45℃ Storage temperature range -10℃～50℃

2. Humidity Working humidity range ≤70%RH (no water vapor condensation) Storage humidity range ≤95%RH (no water vapor condensation)

Semco SI-BTW 5000A- Semco Transistor Welding Power source (Semco SI-BTW 5000A)

·       The highest welding frequency in the industry (200KHz) and the most powerful pulse power in the industry.

·       The welding current rises quickly, enabling high-quality welding of workpieces in a very short time.

·       Constant current, constant voltage, constant current and constant voltage three control modes.

·       The full function can output 4 waveforms at a time, and the lite version can output 2 waveforms at a time.

·       It has the function of weldment resistance detection to achieve high reliability and high precision welding.

·       It has the function of slow rise and fall of current and voltage.

·       Fully closed-loop control, which can accurately control welding current and welding voltage.

·       The actual discharge waveform can be displayed.

·       It has the alarm prompt function of fault (explosion, overcurrent, undercurrent, abnormal temperature, etc.).

·       800*600 resolution, 8-inch high-definition color screen, full Chinese display, touch operation.

Semco SI BMST 1-24S (50A/120A) With Cabinet:
BMST Name: 1-24 string protection board tester 120A
Short circuit protection test: refers to the real short circuit protection test microsecond level.
Drop test: It means that the signal line of a certain section can be detected if it falls off or breaks.
Power consumption test: refers to the true and accurate power consumption of each section.
Equalization Current and Equalization Voltage.
1-24 series power battery protection plate tester, high degree of automation, friendly Chinese interface, fast test speed, high test accuracy. It has 13 performances of testing overcharge, overcharge recovery, over discharge, over discharge recovery, overcurrent (overcharge current and over discharge current), internal resistance, self-consumption, short circuit protection, overcharge protection time, overcurrent protection time, over discharge protection time, balanced current and balanced voltage.

It can meet the test of ternary lithium battery, lithium iron phosphate battery and cobalt acid battery protection plate on the market at present, and has the test gear switching function of ternary lithium battery, lithium-ion battery and cobalt acid battery.
The instrument is required to be connected to the computer. The hardware configuration of the computer requires that the general office computer can be used. The system generally requires XP system. The instrument and computer adopt the industrial standard 232 interface.

Lithium-ion Cell Grading Machine (Semco SLB 5V 60A 8CH)

Semco SI-P ES 5V 3A 512CH-Energy Saving (High-End):

This product is used for battery capacity separation, formation and Detection, system modular design, channel single-point independence, independent air channel has high thermal stability. When charging, the device uses PWM technology to charge the battery Charging improves system efficiency and reduces losses. When discharging, the equipment feeds the energy of the battery into the grid to realize energy feedback and provide customers with households bring in income.
This equipment is mainly composed of computer system, control software, communication interface and battery testing cabinet. The battery testing cabinet consists of fixtures and The board on which the fixture is placed, the charging constant current and constant voltage source, the discharging constant current source, the storage control circuit, the current sampling circuit, the voltage sampling circuit, The main control center computer, data memory, single-chip microcomputer program and control panel are composed.

Semco SI CT 5V/20A 8CH can be used for capacity test, charge and discharge test, capacity grading and matching, balance charging, etc. of various types of Li-ion Batteries, Ni-mH batteries, Ni-CD batteries. SI CT 5V/20A 8CH isolation detection technology can determine the location of the bad cells without disassembling the battery pack, then replace it. It can even charge and discharge the unbalanced battery pack to balance the battery and restore the battery pack to normal balance.

Semco SI-D ES 5V 10A 256CH - (18650-33140):
Product name: Rechargeable battery detection chemical composition equipment.
Product Model: Semco SI-D ES 5V 10A 256CH - (18650-33140) Channel parameters: 256 channels, voltage 5V, charging current 10A, discharge current 10A.
Product specifications: Energy-saving feedback type, open-frame cylindrical 18, 21, 26, 32, 34 batteries are dedicated.
Equipment model: Semco SI-D ES 5V 10A 256CH - (18650-33140).
Equipment structure: The fixture adopts a quick push clip design, and the battery is placed on both sides;
Reference dimensions of single-layer equipment (mm): length 1596mm, width 500mm, height 1840mm (for reference, the actual equipment shall prevail);
Note: The clamp part is designed with a quick push clamp, which is compatible with cylindrical 18, 21, 26, 32, 33, and 34 series batteries. The height of the clamp can be adjusted within a range of 60- 140mm. 

Semco SI-V CT 5V 30A 16CH:
The constant voltage and constant current charging is safe and smooth for prismatic cell tester and the voltage and current sampling output of the device is controlled through the four-wire system connection for soft start, so as to make a safe and smooth transition in the constant voltage and constant current charging process to avoid the occurrence of peak damage to the battery.
High-precision calibration: charging current, discharge current, charging voltage and discharge voltage are all calibrated by Agilent with high precision to ensure the accuracy of current and voltage within 0.5‰.

Semco SI CT 5V 50A 8CH (Cell Tester)

Battery Pack Testing Machine - Neware (CE-6004n-100V50A-H)

Semco SI CT 5V 120A 16CH-BK:

Semco SI-ZP BCDS 60V 30A 2CH- Semco Portable Battery Charge & Discharge Cabinet:
1. Equipment model 1. Equipment model Semco SI-ZP BCDS 60V 30A 2CH
2. Environmental conditions 1. Temperature Range of working temperature 0℃～45℃ Storage temperature range -10℃～50℃ 2. Humidity Working humidity range ≤70%RH (no water vapor condensation) Storage humidity range ≤95%RH (no water vapor condensation) 

Appearance and functional characteristics of the equipment
Equipment function:

- Paste highland barley paper- Sticker efficiency: ≥4000 pcs/hourEquipment features:
- Feeding method: Manually load batteries to the feeding hopper- Receiving method: Manual collection- Sticker station: stick 4 batteries at a time- Sticker method: The cylinder drives the knife to paste the barley paper- Control system: Panasonic PLC+7-inch MCGS touch screen